DCSA 36G (DC-Linear-Actuators)
DCSA 36G (24V - 005 mm/s - 050 mm)
Order no.: 600041
Voltage: | 24,0 V |
Speed: | 5 mm/s |
Max. Torque: | 1.700 N |
Stroke: | 50 mm |
Hall-Sensor: | no |
1 -
8
of
8
Variants
Item | Quantity | Voltage | Speed | Max. Torque | Stroke | Hall-Sensor | No. of pulses | |||
---|---|---|---|---|---|---|---|---|---|---|
|
600041 |
|
24,0 V | 5 mm/s | 1.700 N | 50 mm | no | - | ||
|
600035 |
|
24,0 V | 10 mm/s | 2.100 N | 50 mm | no | - | ||
|
600029 |
|
24,0 V | 18 mm/s | 700 N | 50 mm | no | - | ||
|
600047 |
|
24,0 V | 40 mm/s | 800 N | 50 mm | no | - | ||
|
600141 |
|
24,0 V | 5 mm/s | 1.700 N | 50 mm | yes | 2 | ||
|
600135 |
|
24,0 V | 10 mm/s | 2.100 N | 50 mm | yes | 2 | ||
|
600129 |
|
24,0 V | 18 mm/s | 700 N | 50 mm | yes | 2 | ||
|
600147 |
|
24,0 V | 40 mm/s | 800 N | 50 mm | yes | 2 |
SERIES DCSA 36 with protected
ACME-Screw |
Motor: Type: permanently excited DC motor Commutation: brushed Motor housing: Sheet steel, galvanised Ø Motor: 37 mm Bearing: Slide bearing/Ball bearing |
Gear: Gear type: Spur gear / 12:1 or 50:1 Gear housing: Zinc-cast Gear material: Steel Screw nut: Plastic ACME-Screw: TR 10x3 mm, protected Hubhöhe: 50 mm up to 300 mm Lubrication Gear: Grease, permanent lubrication |
General: Operating mode: Short time operation (S2), intermittent (S3) Duty cycle: 30% - 80% Operating temperature: Direction of rotation: anticlockwise/clockwise Protection class: IP40 Electrical connection: Plug flags 4,8 x 0,5 mm/Molex-connector All variants also available with encoder |
|||